1 1/2-Inch-12 Trim Die

The RCBS 1 1/2-Inch-12 Trim Die is a unique hardened die designed to be used with a file to trim oversized .50 BMG cases to the correct length. It features a 1 1/2-inch-12 thread and is designed for use with the RCBS AmmoMaster press with the .50 BMG Conversion Kit installed. This ensures a secure fit and reliable performance when used with the press.

To use the die, you first need to run the oversized case into it. The die will cut off any excess length, leaving you with a properly trimmed case. Because this die is hardened, it is durable and long-lasting, allowing you to trim many cases before needing to replace it.

If you are a reloader who frequently works with .50 BMG cases, this trimmer die is a must-have tool in your arsenal. It will save you time and effort by ensuring your cases are properly trimmed to the correct length every time.

• Designed for use with the RCBS AmmoMaster press with the .50 BMG Conversion Kit
• Hardened die features a 1 1/2-inch-12 thread
• Use it with the .50 BMG Conversion Kit
• Made in USA

FAQ

What is a trim die?

• An RCBS Trim Die is a hardened steel die designed to trim rifle cases to proper length by running the case into the die and using a file to file the case down flush to the die. This provides a simple, precise way to bring cases back to uniform length after sizing and is intended for reloaders who want a manual, die guided trimming method as opposed to a dedicated case trimmer.

Will this 1-1/2"-12 Die fit in my press?

• This die uses 1-1/2”-12 thread and is not compatible with standard 7/8”-14 thread found on many reloading presses. This die must be used with a press such as the RCBS AmmoMaster-2 which is built to accept this larger die size.

More Questions? Refer to the RCBS Dies FAQ

Component and Caliber Reference Table