The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and roll crimps.
- Cases must be lubricated
- Steel Sizer Die sizes the case and de-primes
- Expander Die expands the case and imparts case mouth flare/bell
- Seater Die seats and roll crimps the bullet
- Made in USA
Note:
- The .50-95 Winchester Express is not a traditional Sharps caliber and was developed by Winchester for their Model 1876 lever-action rifle.
- The .56-50 Spencer is not a typical Sharps caliber, as it is used for the Spencer repeating rifle, however the tapered design sometimes allows it to be used in Sharps carbines.
FAQ
What is a roll crimp?
- A roll crimp turns the case mouth into the bullet’s cannelure, locking the bullet in place to prevent movement during recoil or magazine feeding—especially important for straight walled rifle cartridges.
More Questions? Refer to the RCBS Dies FAQ
- Manual:
- Download Manual
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
