For reloaders using RCBS Group C and Legacy Series dies, this steel decapping unit is a must-have component, designed for straight-walled rifle configurations, providing reliable and consistent performance every time you use it.
Made from high-quality steel materials this decapping unit ensures that your reloading process runs smoothly and accurately.
- RCBS Group C and Legacy Series dies
- High-quality steel materials
- Made in USA
Installation Instructions:
- Install the decap unit in the following manner:
Screw the decap unit into the die with 3/16" of the pin sticking out from the die. - With the decap unit hanging loose, lube a case and run it up into the size die.
- While the case is still in the size die, lock the nut down.
- Extract the case from the die and the die from the press. Check to see if the decap unit is centered by rotating the die in the large lock nut.
- If it is not centered, repeat the process, break the locknut loose, and size a case, turning the lock nut over before locking it down.
Compatibility
Can't find your cartridge, or not sure which decap unit or pin you need? Look it up here!
| .375 Winchester |
| .38-55 Winchester & Ballard |
| .40-65 Shiloh-Sharps 408" Bore |
| .40-70-2 1/2" Sharps Straight |
| .405 Winchester |
| .444 Marlin .45-70 U.S. Government |
| .45-60 Winchester |
| .45-70 U.S Government |
| .45-75 Winchester |
| .45-90-2.4" Sharps Straight |
| .45-100-2.6" Sharps Straight |
| .45-110-2 7/8" Sharps Straight |
| .45-120-3 1/4" Sharps Straight |
| .450 Marlin |
| .458 Lott |
| .458 Winchester Magnum |
| .50-70 U.S. Government |
| .50-90-2 1/2" Sharps Straight |
| .50-95 Winchester Express |
| .56-50 Spencer |
| .500 Jeffery |
| .500 Nitro Express |
| .505 Gibbs |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
